LED neon flex accessories
LED neon flex accessories
Accessories for LED neon flex include end caps for use at the end of a run; L, T or X connectors, fixing channel, splice connectors, etc.
When using LED neon you will need a power supply unit to enable your LEDs to light up.
Neon flex
LED neon flex accessories - current product range:
 |
|
|
|
Neo-Neon male connector
LED 061A, LED neon flex 2-pin male connector
Current availability: 2-10 work days |
£1 + VAT
|
| |
 |
|
|
|
Neo-Neon RGB end cap
LED074, End cap used to seal end of RGB flex and avoid any electric shorts, for single colour flex
Current availability: 2-10 work days |
£1 + VAT
|
| |
|
|
|
|
Neo-Neon RGB male connector and heat shrink
LED 071, LED neon flex male connector pin and heat shrink to fit RGB flex
Current availability: 2-10 work days |
£1 + VAT
|
| |
|
|
|
|
Neo-Neon LN-FX-CA-4 end cap
LED062, End cap used to seal end of flex and avoid any electric shorts, for single colour flex
Current availability: 2-10 work days |
£2 + VAT
|
| |
|
|
|
|
Neo-Neon male connector and heat shrink (outdoors)
LED 060, LED neon flex 2-pin male connector and heat shrink
Current availability: 2-10 work days |
£3 + VAT
|
| |
 |
|
|
|
Neo-Neon RGB splicable connector
LED 073, LED neon flex RGB splicable connector
Current availability: 2-10 work days |
£3 + VAT
|
| |
|
|
|
|
Neo-Neon splicable connector and heat shrink
LED 061, LED neon flex 2-pin male connector and heat shrink
Current availability: 2-10 work days |
£3 + VAT
|
| |
 |
|
|
|
Neo-Neon connector L with 2-pin connection
LED068, For single colour flex, use male connectors LED060/LED061A to make contacts, sold separately
Current availability: 2-10 work days |
£8 + VAT
|
| |
 |
|
|
|
Neo-Neon connector T with 2-pin connection
LED067, For single colour flex, use male connectors LED060/LED061A to make contacts, sold separately
Current availability: 2-10 work days |
£8 + VAT
|
| |
 |
|
|
|
Neo-Neon connector X with 2-pin connection
LED066, For single colour flex, use male connectors LED060/LED061A to make contacts, sold separately
Current availability: 2-10 work days |
£8 + VAT
|
| |
 |
|
|
|
Neo-Neon power connector with rectifier for 240v
LED051 Power connector with rectifier for 240v flex, provides power to 240v flex and terminates in a 13 amp plug
Current availability: 2-10 work days |
£9 + VAT
|
| |
 |
|
|
|
Neo-Neon middle connection lead 1.5m
LED065, Mid connection lead joins two pieces of flex together, for single colour, needs two connectors LED060 or LED061A
Current availability: 2-10 work days |
£11 + VAT
|
| |
 |
|
|
|
Neo-Neon LN-FX-RGB-CH mounting channel 1m
LED076, Use to create straight lines of RGB LED flex, channel fixes to wall and then flex fits into the channel
Current availability: 2-10 work days |
£12 + VAT
|
| |
 |
|
|
|
Neo-Neon RGB front power connector
LED 070, Front power lead connects the RGB flex to the controller.
Current availability: 2-10 work days |
£14 + VAT
|
| |
|
|
|
|
Neo-Neon middle connection lead 3.0m
LED065A, Mid connection lead joins two pieces of flex together, needs two connectors LED060 or LED061A
Current availability: 2-10 work days |
£15 + VAT
|
| |
|
|
|
|
Neo-Neon RGB middle connection lead
LED072, Mid connection lead joins two pieces of RGB flex together, needs two connectors LED060 or LED061A
Current availability: 2-10 work days |
£15 + VAT
|
| |
 |
|
|
|
Neo-Neon LN-FX-CH-6FT mounting channel 1.8m
LED069, Use to create straight lines of single colour flex, channel fixes to wall and then flex fits into the channel
Current availability: 2-10 work days |
£17 + VAT
|
| |
|
|
|
|
Neo-Neon LN-FX-RGB-CH mounting channel 2m
LED076A, Use to create straight lines of RGB LED flex, channel fixes to wall and then flex fits into the channel
Current availability: 2-10 work days |
£18 + VAT
|
| |
 |
|
|
|
Neo-Neon power supply for the wall dimmer
SL-MA-PLUG-12VDC Power supply for the ST-DMX-WD wall dimmer, for use with LED ribbon tape, both sold separately.
Current availability: 2-10 work days |
£20 + VAT
|
| |
 |
|
|
|
Abstract CR2500 colour rail UPVC cove housing 2.5m
2.5m UPVC housing for use with flex ribbon, includes mounting brackets
Current availability: 2-5 work days |
£22 + VAT
|
| |
 |
|
|
|
DC switch mode power supply 10W 24V
PS-IP67-10W-24V For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£23 + VAT
|
| |
 |
|
|
|
Neo-Neon transformer power supply 1-amp
LED 064A, LED neon flex 1-amp transformer for use with 9.14m length flex roll, sold separately
Current availability: 2-10 work days |
£23 + VAT
|
| |
 |
|
|
|
DC switch mode power supply 30W 24V
PS-IP67-30W-24V For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£29 + VAT
|
| |
|
|
|
|
Neo-Neon transformer power supply 4-amp
LED 064, LED neon flex 4-amp transformer for use with 9.14m length flex roll, sold separately
Current availability: 2-10 work days |
£36 + VAT
|
| |
|
|
|
|
Neo-Neon LED wall dimmer with 4 DMX channels
ST-DMX-WD For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£54 + VAT
|
| |
 |
|
|
|
DC switch mode power supply 60W 24V
PS-IP67-60W-24V For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£55 + VAT
|
| |
 |
|
|
|
DC switch mode power supply 100W 24V
PS-IP67-100W-24V For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£90 + VAT
|
| |
 |
|
|
|
DC switch mode power supply 150W 24V
PS-IP67-150W-24V For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£120 + VAT
|
| |
|
|
|
|
DC switch mode power supply 200W 24V
PS-IP67-200W-24V For use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£146 + VAT
|
| |
 |
|
|
|
LED controller 4-channel 100W
EO-LED-PC100 Integral power supply unit, 24v, IP20 indoor, for use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£180 + VAT
|
| |
 |
|
|
|
Neo-Neon DMX RGB LED power supply
EO-LED-PC300 DMX controlled RGB LED power supply 2x150W, 24v, for use with LED ribbon tape, sold separately.
Current availability: 2-10 work days |
£270 + VAT
|
| |
LED lighting comparison chart
Neon flex
Page last updated: Tuesday 07 September 2010
Full Wedgwood product list with 13365 audio visual products
How to order from Wedgwood
Wedgwood supply audio visual equipment to businesses, education, government, retail, leisure industry and registered charities. Please note that Wedgwood does NOT supply equipment to home users.
We offer the following payment options: bank transfer, cheque, debit card, credit card, 14 and 30 day credit accounts (please see below).
We do not charge you credit card surcharges.
To place your order, for delivery to mainland UK, please fax your official purchase order to 01754 768036, including your purchase order number, your invoice/delivery address, goods you require, delivery charge, total cost including VAT and your preferred method of payment. We are sorry we are unable to take telephone orders, but you can order online with our shopping cart.
If you are an educational establishment, government establishment, large registered charity or blue chip company and wish to pay by 14 or 30 day account, then please fax your official purchase order for processing.
We would ask that you please do not book installation of your equipment before your goods have arrived and have been fully tested, as we accept no liability for installation or other cost occurred in the case of late delivery. Unfortunately, courier delays, manufacturer supply problems, etc, are beyond our responsible control.
Should you need any help placing your order, then please telephone our sales team on 01754 769967. Many thanks.
Copyright © Wedgwood AV Ltd 1996-2010
UK delivery charge is £12 to £15 + VAT per order depending on the product.
All prices are excluding VAT and subject to availability. E. & O.E. www.lcdprojectors.co.uk
How to order / Terms and conditions
The following presentation equipment guides are available:
FREE projectors and presentation equipment guide
FREE plasma screen guide
FREE interactive whiteboard guide
FREE LCD monitor guide
|